Depending on the model, you can change the date and day of the week using different crown positions or setting directions. The exact operation depends on the movement used. Therefore, we recommend that you always take a look at the instruction manual for your model as well.
How do I set the date? Carefully pull the crown out to the designated position and turn it slowly in the specified direction until the desired date is displayed. Please do not use the quick date setting during the automatic date change period. For many movements, this timeframe is approximately between 9:00 PM and 3:00 AM. During this time, the date mechanism is already working in the background. Manual quick setting can put unnecessary strain on the movement or, in the worst-case scenario, damage it.
How do I set the day of the week? If your watch also has a day of the week display, it is—depending on the model—also set via the crown. Pull the crown out to the designated position and adjust the day step by step. The same applies here: Avoid using the quick setting approximately between 9:00 PM and 3:00 AM, as the date and day of the week can automatically switch during this timeframe.
For our Sternglas Berlin, it works as follows: Carefully pull the crown out to the first click position (Position 2). Turn it counterclockwise to set the desired date. Turning the crown clockwise allows you to adjust the day of the week.
How do I set the date and day of the week safely? If you do not know whether your watch is currently within the switching phase, you can proceed as follows:
Pull the crown out to the hand-setting position.
First, set the time to approximately 6:00 AM or 6:00 PM (06:00).
Then, set the date and day of the week.
After that, set the correct time. This prevents you from adjusting the date or day of the week during the automatic switching phase.
Why does the date change at noon instead of midnight? If the date changes around midday instead of midnight, the watch's 12-hour cycle is likely offset by half a day. In this case, turn the hands forward by another 12 hours and then set the correct time. This way, the watch will correctly recognize again when day and night, or midnight, are reached.
Do I have to correct the date every month? No, not every month—only after months with fewer than 31 days (February, April, June, September, and November). Standard watch movements operate on a 31-day cycle and do not automatically recognize whether a month has 28, 30, or 31 days. Therefore, after a shorter month, you will need to advance the date manually. This is completely normal and not an indication of a defect.
If you are unsure about something you can, of course, always contact our customer service :) We are happy to help!