If your strap features a quick-release system, you can easily change it yourself without any additional tools.
How to Remove the Strap
Place your watch face down on a soft, clean surface to prevent scratches on the case and crystal.
Carefully slide the small quick-release pin on the underside of the strap inward. This compresses the spring bar, allowing you to gently slide the strap out of the watch lugs.
Never use excessive force. If the strap does not release smoothly, check whether the pin is fully retracted.
How to Attach the New Strap
Insert one end of the spring bar into the lug hole on the watch case.
Pull the quick-release pin back and carefully guide the opposite end into position between the lugs.
Slowly release the pin until you hear or feel the spring bar snap securely into place.
Check the fit by gently pulling on the strap to ensure it is locked in.
What Should I Look Out For?
Always ensure that:
The spring bar is fully engaged on both sides
The strap is seated straight and not tilted
The quick-release pin moves freely
The strap is firmly secured to the case
Caution: If the spring bar is not properly seated, the strap can come loose, causing the watch to fall and become damaged.
What About Stainless Steel or Milanese Straps?
Depending on the model, stainless steel and Milanese mesh straps may also feature a quick-release system.
The process remains essentially the same. Because metal bracelets are less flexible than leather or fabric, take extra care to keep the spring bar straight and avoid pressing the metal links against the case edge.
What If My Strap Does Not Have a Quick-Release System?
Traditional straps use standard spring bars without a release pin and typically require a dedicated spring bar tool.
If you do not have the proper tool or feel uncertain about changing the strap yourself, we recommend visiting a local watchmaker or jeweler. This ensures a clean swap and prevents scratches to your case or damaged pins.